Step 1: Material selection——The real differences between imported kraft paper and domestically produced paper

The strength, moisture resistance, and service life of paper barrels are rooted in the raw materials. The body of a paper barrel is usually made of multiple layers of cowhide cardboard rolled with adhesive. The weight, number of layers, and fiber arrangement direction of the cardboard directly determine the compressive strength of the finished product.

Danqi uses high-strength imported kraft paper as the main material for the barrel body, and is equipped with food grade liner film and environmentally friendly adhesive to ensure that the product meets the requirementsInternational environmental standards such as ROHS and REACH are applicable to fields with strict hygiene requirements such as food and medicine. The core differences between imported kraft paper and domestically produced paper are reflected in three aspects:

Fiber length and interlacing degreeImported kraft paper has longer fibers, denser interweaving, and higher ring compression strength under the same weight;

Stability of moisture contentThe moisture content control of imported paper is stricter (usually controlled within8-12%), the barrel body is not easily deformed due to humidity changes after rolling;

Batch consistencyDuring mass customization, the thickness deviation between different batches of domestically produced cardboard may reachMore than 5%, while imported paper is usually controlled within ± 2%.

Step 2: Rolling——How to transform multi-layer kraft paper into a barrel body

Rolling is the first core process of forming paper barrels. Cut the raw paper into strips according to the design size, add the prepared adhesive (such as polyvinyl alcohol solution), use a rolling machine to roll the multi-layer kraft paper into a cylindrical shape layer by layer, and then dry it.

There are two crucial details in this process that are easily overlooked:

Uniformity of adhesive coatingA thin adhesive layer can lead to weak interlayer bonding, which may occur later onDefect of "glue opening"; If it is too thick, it will increase the weight of the barrel and affect the drying efficiency. Danqi uses a quantitative coating system on the production line to ensure consistent adhesive content for each layer of paper.

Rolling tension controlUneven paper tension during the rolling process can cause the barrel to appearWrinkles or ovality exceeding the standard. The barrel body should be round, smooth, and free of obvious roundness and concavity, which has a direct impact on the subsequent assembly of iron hoops and the sealing of the bottom.

After the barrel is dried, Danqi's production line can reach a daily production capacity ofMore than 100000 units, capable of supporting both large-scale orders and emergency replenishment needs simultaneously.

Step 3: Iron hoops and bottom sealing——The key factor determining the pressure bearing capacity of paper drums

After the barrel body is rolled, it enters the iron hoop assembly and bottom sealing process. This step directly determines the compressive strength and transportation safety of the paper drum.

Installation of iron hoopsBend the cut galvanized strip steel around the barrel wall and weld it to form an iron hoop. The width of the iron hoop is usually55mm， Thickness 0.5mm. The function of the iron hoop is not only to reinforce the barrel mouth and bottom, but also to prevent the barrel from being damaged due to lateral impact during transportation.

Back cover and roll mouthPlace the bucket with iron hoops installed at a distance of approximately from the upper and lower openingsGrind the groove at 15mm, fix the bottom plate in the bucket, and then roll the iron hoop together with the bucket wall at the opening 360 degrees to form a circular edge with a diameter of 8-12mm, so that the bottom plate is firmly clamped between the circular edge and the iron hoop. This "rolled edge clamping" structure can effectively enhance the load capacity of the bucket bottom, and even if some deformation occurs, it is not easy to drop or break the bottom.

Painting and anti-corrosionPaint the iron mouth and barrel body to improve moisture resistance and sun protection performance. Danqi adopts a uniform coating process to avoid defects such as missed coating, bubbles, or sagging.

Step 4: Printing——The Last Mile of Brand Presentation

The printing on the outer wall of the paper barrel is not only a brand display, but also an important carrier for product traceability. The printing quality must meet the following standards: clear handwriting, uniform ink color, strong adhesion (no ink peeling during normal handling), and noThe phenomenon of "ink running" or blurred edges.

Danqi supports printing trademarks, product information, batch numbers, and other content on the barrel body, and can perform multi-color printing based on the design draft provided by the customer. For pharmaceutical raw material barrels that require anti-counterfeiting traceability, QR codes or serial numbers can also be printed.

Step 5: Quality Inspection——The 'Three Passes' Every Bucket Has to Pass

Quality inspection is done in paper barrelsThe boundary between "product" and "qualified product". Danqi has an independent testing room, and each batch of products must pass the following key testing items:

① Compressive strength test
Use a microcomputer controlled pressure testing machine for longitudinal pressurization and record the critical deformation value of the barrel body. Industry standards typically require that the ring compression strength reachAbove 8000N. The carrying capacity of Danqi paper drums exceeds 50kg, meeting the needs of long-distance transportation and storage stacking.

② Drop test
basisISTA 3E or GB/T 4857.5 standard, use a programmable drop testing machine to conduct three-dimensional drop tests on surfaces, edges, and corners, with drop heights set within the range of 0.8-1.2m according to the packaging grade. After testing, the barrel should not have any cracks or severe deformations.

③ Sealing and moisture resistance testing
adoptThe 0.05MPa air pressure method is used to test the sealing between the lid and bottom of the barrel, while evaluating the integrity of the moisture-proof layer of the inner lining. For pharmaceutical raw materials and food grade applications, sealing directly affects the quality and safety of the contents.

Danqi's quality inspection process covers every node from raw material warehousing to finished product outbound, and the product qualification rate is controlled withinMore than 99.8%.

Step 6: Customized Services——Size, mold, and small-scale trial production