Generally speaking, products have corresponding treatment standards during production, and only when they meet the standards can they meet the packaging requirements. Of course,fibre drum It's the same, so what are the quality requirements for this type of packaging product?

1.fibre drum It should be round and without obvious defects such as roundness, concavity, skewness, deformation, etc.

2. Round rolled edges with smooth and paperless tongue.

3. The barrel body is smooth without mechanical damage, wrinkles, or glue peeling. The waterproof paint is evenly applied without any omissions, bubbles, or obvious sagging.

4. The closure is firmly connected and flexible to open, and the lid and bottom of the barrel are well sealed after closure.

5. The barrel hoop should be welded firmly and smoothly, without burning through or virtual welding, and without obvious rust, peeling, or cracking.

6. When printing graphics on the barrel, they should be clear, uniform, firmly attached, and free of ink running.

7. Galvanized or painted barrel clamps and closures should be shiny and free from detachment.

8. The inside and outside of the paper bucket are clean and free of oil stains.

The above are the quality standard requirements for paper drums during production.